BEGA - Catalogus - EN - 20.05.R01 web
Dismounting
MECHANICAL PULLERS
BETEX 46 Simple, handy 2-arm puller for parts gripped externally. For dismounting of, for example, pulleys, bearings, rings and fans from electric motors. During dismounting, the arms cannot slip as they are pressed against the cross bar. The harder the pulling force, the tighter the jaws grip around the workpiece. One-hand operation. The spring pressure ensures that the puller arms close steadily.
Type
Art. no 046200 046000 046010 046020
Max. diam. mm Max. shaft length mm
46-200 46-000 46-010 46-020
60 75
40 60
110 220
100 200
BETEX 47 Patented special 2-arm bearing pullers
This bearing puller is especially suitable for pulling bearings, rings, etc. fit flushly with other parts. This is due to the special jaw construction. Prevent damage during dismounting and save time. This system is often used for dismounting bearings from anchors, pump shafts, etc.
Type
Art. no 047100 047200 047300
Max. diam. mm Max. shaft length mm
47-100 47-200 47-300
45 90
65
100 150
150
BETEX 48/49 2/2 Bearing splitters and counter supports
BETEX 48/49 is constructed for the dismounting of hard-to-reach bearings and other parts, where there is insufficient space for grip with a puller. Suitable for multiple applications. For a complete set you need both the BETEX 48 and the BETEX 49.
Type Art. no Max. diam. mm Counter support Art. no Max. shaft length mm 48-060 048060 60 49-100 049100 150 48-075 048075 75 49-100 049100 150 48-115 048115 115 49-200 049200 200 48-150 048150 150 49-300 049300 300
Page 44
Made with FlippingBook - Online catalogs